RSS

Tag Archives: mast guide

A laminated mast guide

I needed a method of safely dipping the mast under the Pacific Coast Highway bridge over Newport Back Bay. Alice Gale’s designer Francois Vivier provided a drawing for my modified ‘Balanced Lug Sail’ plan with a detail for a laminated mast guide.  I used mahogany cut into 2-4 mm strips.  These strips where bent into shape and epoxy glued.  After the epoxy set I shaped each guide on the bandsaw and then sanded to final shape.   The top of each guide is dowel jointed to the mast partner and the lower guide is screwed to the center board with a center brace epoxy glued. The guide was bright finished with varnish.

Centerboard and mast guide view

Building the laminated mast guide

Shaping the mast guide

Varnished Mast Guide

Mast guide detail, dowels used to pin to mast partner

 
Leave a comment

Posted by on August 20, 2011 in Building Stage

 

Tags: , , , ,